How to read a measuring tape?

How to Read a Measuring Tape
May 5, 2016 – 06:58 am
Fatmax Hard Tape Measuring
Image titled study a Measuring Tape action 1


Method 1

Reading the Tape

Imperial Devices

  1. Use the huge, numbered markings for inches. On a tape measure labeled with imperial devices, many prominent markings usually are the one-inch marks. These are usually marked by long, thin lines and relatively large numbers.
    • Every 12 ins, there may often (but not always) be a foot marking. This is in a different sort of shade compared to the other markings — often purple in comparison to the normal black markings. After each foot establishing, the figures close to each inch mark will both duplicate from 1 - 11 once again or keep counting. This may change from tape measure to tape measure.
    • Note that the range next to the number scars each inch, perhaps not the amount itself.
  2. Use the larger marks between two-inch markings for half-inches. A half-inch level is often focused between any two one-inch scars. It always has the second-longest tagging (after the one-inch marks). There will be one half-inch level between each one-inch level, but there's two half-inches per inches.
    • Note that, beginning with half-inch marks, not absolutely all outlines can be labeled with numbers. In this instance, you should employ the markings on either side to guide you. For instance, the half-inch level between inches three and four represents 3 1/2 ins, even though it's perhaps not labeled.
  3. Make use of the smaller lines between half-inches for quarter-inches. After half-inches come quarter ins. These markings are smaller (and sometimes skinnier) than half-inches but usually bigger than the densely-packed scars around them. These are generally uniformly spaced between each half-inch level and another inch-mark. You will find four quarter-inches in a single inch.
    • Note that lines establishing 25 % of an inches occasionally aren't any various in dimensions from eighth-inch marks. In cases like this, remember that two eighths of an inch make one fourth. Count towards second eighth-inch marking following the inch marking — here is the quarter-inch (additionally the range in identical spot on one other side of the half-inch mark may be the three-quarter inch.)
  4. Image titled Read a Measuring Tape action 2Use the small, regular markings for one-eighth-inches. Smaller nevertheless versus quarter-inch markings will be the one-eighth-inch markings. These markings are focused between the inches marking together with quarter-inch tagging, the quarter-inch marking and also the half-inch marking, and so on. There are eight one-eighth inches per inch.
  5. Use the little, densely-packed marks for sixteenths of an inch. The shortest outlines of all on most measuring tapes are the sixteenth-inch marks. You will find 16 of the tiny markings per inch — four in each quarter-inch.
    • Note that some very precise measuring tapes will mark down seriously to one-thirty-second of an inch as well as one-sixty-fourth of an inch! Utilize the same pattern for acknowledging these miniscule dimensions.
  6. Add the inch segments to determine complete size. While measuring a size, getting an exact price simply suggests witnessing where in actuality the tape lines up. Very first, mark the location in which the measuring tape outlines up with the side of finished . you are measuring. Get the closest inch before this point. Then, get the closest half-inch before this time. Then, the closest quarter-inch, and so on. Mount up your inches and portions of inches unless you have actually a precise dimension. This really is less complicated than it appears — see below for an illustration.
    • Suppose we've calculated through the the one-inch mark, past one quarter-inch level, and past one eighth-inch mark. To locate our measurement, we have to include: 1 (our inches) + 1/4 (our quarter-inches) + 1/8 (our eighth-inches).
    • Since there are two eighth-inches in a quarter-inch, we are able to rewrite this as: 1 + 2/8 + 1/8 = 1 3/8 ins.

Image titled Read a Measuring Tape action 3Metric devices

  1. Make use of the big, numbered markings for centimeters. Of many metric measuring tapes, centimeters will be the most prominent markings. Centimeters are often labeled with big lines and, alongside each line, several. As with inches, the line marks each centimeter, maybe not the quantity it self.
    • When you have a calculating tape more than one meter (100 centimeters), usually, the meter(s) will receive a special tagging too — usually in a unique shade compared to the rest of the markings. After each meter, the centimeter markings may begin once again from zero or continue counting. This varies from calculating tape to calculating tape.
  2. Use the smaller markings between centimeters for 0.5 centimeters. Some (however all) metric measuring tapes will have medium sized scars uniformly spaced between each centimeter level. These level half-centimeters. These markings are often maybe not branded with a number.
    • The metric system is in base ten, which makes it less difficult to work with decimals versus imperial measurements. Because of this, it's typically fine to mention to half-centimeter markings in decimal terms (in other words., 1 1/2 centimeters becomes 1.5 centimeters.)
  3. Utilize the little, densely-packed markings for millimeters.The small, tight, slim outlines between centimeter markings represent millimeters (or one-tenth-centimeters). There are ten millimeters in a centimeter (and, hence, a thousand in a meter.)
    • If your measuring tape does not have 0.5 centimeter markings, the 5th millimeter after each and every centimeter marks the 0.5 centimeter.
  4. Add the centimeter sections to look for the complete size. Determine with a metric measuring tape, very first discover nearest centimeter prior to the length you are calculating, then your closest millimeter. You should use a 0.5 millimeter level to aid make suggestions if the measuring tape has them. Your dimension (in centimeters) is a decimal where tenths destination is indicated by the millimeter tagging. As an example, see below:
    • Let's say we measure after dark 33 centimeter level to your 6th millimeter tagging. In cases like this, we could get a hold of our length in centimeters similar to this: 33 + 0.6 = 33.6 centimeters
    • Whenever we desired our length in some thing other than centimeters, however, we'd want to shift the decimal destination to make up. Like, let's imagine we desire the answer above in yards. In cases like this, since there are 100 centimeters in a single meter, we could make use of a conversion element similar to this: 33.6 × 1 meter/100 centimeters = 0.336 meters
    • In general, to go from centimeters to yards, move the decimal two places left, and go from yards to centimeters, move it two places off to the right.

Method 2

Using a Measurement

This part handles how to use both most common types of tape measure. If you're in search of simple tips to browse the markings on your own tape measure.

Image titled Read a Measuring Tape action 7 Image titled study a Measuring Tape action 9 Image titled study a Measuring Tape Step 10 Image titled study a Measuring Tape Step 11
You might also like
How To Use A Tapemeasure
How To Use A Tapemeasure
Related Posts